This step will explain how to install the usb loader channel to your Wii menu. First go to the homebrew channel then load the WAD manager. The screen will go green for a second and you will see a disclaimer on the screen. Press "A" on your Wii remote to continue.
Use your left and right directional arrows on your Wii remote to select SD card. On your Wii menu there should be a new channel called usb loader channel. In this next step I will explain how to use your new Channel, and how you can play your games on it. First, plug your usb device into your Wii usb slot and start the USB loader channel. I haven't figured out how this works. Next, use the left and right directional arrows to choose "USB mass storage device", and click A.
It will load all the games on your USB drive and if you downloaded the covers it will show you their cover. Use the up and down directional arrows and press "A" to choose your game. Press "A" again to load your game and press "A" one last time to play your game. If you have any problems just ask it in the comments below. I finally had the time to write the solutions to some Wii error codes. If at any time you Wii spits an error code at you, here two of the most common errors, and their solutions.
Solution: Run trucha bug restorer to restore the exploit on your Wii. Question 1 year ago on Step 5. Answer 1 year ago. Not sure if anyone else has had this problem but i followed the instructions, however when i go to load USBLoadermodBrisma. Can anyone help? Reply 1 year ago. Question 1 year ago on Step 1. There is no setup file for me in the wbfsmanager. Reply 2 years ago. You can use this instead. I had the same issue, and used it and it worked out fine.
Reply 4 years ago. Question 3 years ago on Step 1. The link diverts to an archive where you can download all the files ever made concerning it, but no installations. I realise I'm late to the party here, but still Any options? Answer 2 years ago. Found this link, it worked for me.
Reply 3 years ago. Sadly, no. The Chromebooks operating system is not able to run. Scroll left to the "IOS" option. This will select the IOS file that you installed earlier.
Press A. Doing so confirms your choice. Agree to the terms of use. Press A on your controller to do so. Select an IOS version. Select a custom IOS slot. Select an installation mode. Press Left until you see "Network installation" appear between the brackets. Start the installation. Press A to begin installing the IOS installer. This will move you to the next part of the installation.
Select another IOS version. Select another slot. Use the network installer. Select "Network installation" and press A as you did with the last installer, then wait for the installation to complete. Press any button when prompted, then press the B button. This will restart your Wii. When it finishes restarting, you'll be able to proceed. Part 6. Navigate to the next page of the Homebrew Channel. Press the Right arrow on your Wii remote's D-pad to do so. Select WAD Manager.
It's the second option on this page. Doing so will start up the WAD Manager installer. This agrees to the terms of use. Select "IOS" to load. Disable the emulator. Select "Disable" in between the brackets and press A. Select your SD card. Doing so brings up a list of the files on the SD card that you inserted earlier.
Scroll down and select WAD. It's near the bottom of the screen. Select the USB loader. Install the WAD Manager. Press A when prompted to do so. This will restart the Wii.
Once the Wii finishes restarting, you'll be back on the second page of the Homebrew Channel. Part 7. Pressing it brings up the Home menu. Select Shutdown. It's at the bottom of the menu. Your Wii will power down. It's best to wait until your Wii fully powers down before proceeding. Plug your flash drive into your Wii. The flash drive should plug into a USB port at the back of the Wii.
Turn back on your Wii. Press your Wii's power button to do so. It's next to the Homebrew Channel. Select Start. This process will take several minutes, especially the first time you run the program. Insert a game. Place in the Wii the disc for a game that you want to back up to the USB flash drive. Select Install when prompted. The program will begin reading the contents of the disc.
Select OK when prompted. Doing so will prompt your Wii to begin burning the disc onto the USB flash drive. This process will take quite some time, and the burning progress bar may appear to freeze at multiple points.
Do not remove your USB drive or restart your Wii if this happens. This will complete the burning process. At this point, you can eject the game disc from the Wii. Play your game. Click the game's name, then click the spinning disc icon in the middle of the window. This will launch the game. If the Wii is stuck on the black screen, your console may have crashed.
If you cannot force a shutdown, the only way is to unplug the Wii's power. If the screen goes black and returns to the Wii menu, you'll need to install a cIOS. Not Helpful 4 Helpful Yes, you should skip that step as you already hacked it and already can install homebrew apps.
Not Helpful 2 Helpful 9. Not Helpful 9 Helpful 7. Is it necessary that I format the SD card after installing the homebrew channel? After homebew is installed, you only need to delete the files on your SD card. Formatting the card is not required.
Not Helpful 4 Helpful 9. Unfortunately, that's not possible. Not Helpful 54 Helpful The image of the installed game worked, and I thought the gameplay worked, but it didn't it always send me back to the Wii menu. Milos Tosic. Did you try to load another game? It may be because the WBFS for that game is broken. Not Helpful 3 Helpful 4.
How do I turn my controller back on? On parts 3 and 4 it turns off and won't turn back on. If you are using a black or any non-white Wii remote, it has the motion plus controller in it. Those Wii remotes will not work. Try using the generic white Wii remote. If that does not work, try plugging in the generic GameCube controller. Not Helpful 22 Helpful Click the download link to begin downloading the file. When the download finishes, double click on the file icon to begin the installation process.
Follow the on-screen instructions to install the program. When your drive loads, select it from the drop-down menu in the application window. If you have not already formatted your device, click the "Format" button to format the drive to be read by your Wii console.
0コメント